The method I actually usually use is in order to use a a single in. x 2 in. (actually computing � in. thick and 1 � in. wide) wood made board that is custom-cut towards the wanted length. I paint the board before attaching the shade so the panel matches the nearby woodwork (I definitely hate painting, although I find that will the end result is worth the more effort it takes). I usually cover up this board together with matching fabric in the window shade i am hanging to get an even more professional look.


For a custom end, cover all the particular sides and ends of the board by stapling sewing material around it. This makes any windowpane covering look interesting when the panel will be noticeable, as it would be on the outside the house of your window shape. But remember that tones can also be hung inside the window frame in order that the front of typically the shade is even together with the frame.

A person can also hold a shade on the standard C-shaped window curtain rod or on the rod designed particularly for shades.
To support a window shade on a wood board, have:

? some sort of 1-in. X 2-in. board, cut in order to a length of which equals the finished width from the shade;

? a staple firearm;

? two angle irons or L-shaped brackets (if your hue is wider than 2 feet, a person will need a few or more);

? some sort of screwdriver;

? one huge screw eye for the wall plus several small mess eyes for the particular board to behave as guides intended for the cords; plus

? wall screws appropriate for your wall building (wall mollies or toggles may be needed along using a drill).

Rather than oak window boards , you may use a connect – and – loop tape button to attach typically the shade to the particular board. However, in the event that you prefer the tone mounted on the inside of the window, you can put angle iron at the board stops and screw all of them in the side wall membrane. For any little extra support, use many of the through the board in addition to window-frame ceiling.

Common C-shaped curtain equipment are most appropriate for shades that will are shirred across the top so that they hide the rod returns. Select a new rod having a shallow return on two � in. to 3 � inside. The rod is sold with wall brackets nevertheless, you must purchase the cord guides intended for the rod separately.

The shade is usually usually attached in order to the C-rod with hook – plus – loop mp3 fasteners. A unique type of shirring tape used towards the top of the shade already has the looped side of the particular tape fastener affixed to one side of the shirring tape; the connect side of typically the tape fastener is usually then attached in order to the front of rod.

Regarding shades designed along with vertical gathers, make use of shirring tape with rings or shirring tape without rings. For shades that will are flat if lowered, use some sort of roman shade tape with only wedding rings attached.

I’m sure that we are all aware that there is an unique rod that will be made specifically with regard to mounting blinds above the window shape or on the particular frame. This is composed of a straight rod without returns and is mounted regarding 1 in. out from the walls. The rod is usually custom-cut to the particular needed length and even is finished upon each end using end stops. The face area of the pole gets the hook area of your fastener tape already attached. Likewise included with all the fishing rod (usually) is a base rod for weighting down the bottom of the shade, wall brackets, cord, several cord instructions to the individual rows of cord, and a weighted cap to secure almost all the cord ends together; a multiple-cord guide replaces typically the large screw-eye used above and is definitely installed just inside the end stop on the part where the cords will be pulled.

Yrs ago, when letting a house, I actually discovered which they acquired simply glued typically the top valance in the window coverings towards the rod. Believe me; this is not really appropriate for washing and proper clinging reasons. For your current sake, don’t still consider utilizing glue whenever hanging any windows coverings!